When dealing with raw timber, whether it is a piece you have had to strip back or a new creation, your first step is to feed the dry wood. We recommend a sanding sealer before applying any of our products, particularly with the more porous timbers.

Three Steps to a Waxed Finish

1. To moisturise the raw timber you can use either our Restoring and New Timber Polish or our Orange Oil. You may consider using a sanding sealer (sold at all hardware stores) before the initial waxing/oiling, before step one, if the timber is very dry. Apply sparingly, one to three coats as required (one soft cloth to apply and one soft cloth to buff back), ensuring that the surface is dry to the touch between each coat. If the timber is very dry, the polish or oil will be absorbed rapidly. Provided the timber is not tacky to the touch, you can follow with the next application. If using other manufacturer's preparations such as a tung oil finish it is essential that these are properly cured before applying any wax. If not, the oils can bleed back out of the timber preventing the wax finish from hardening as it should.
2. Follow this with our Cabinet Makers Wax, which is most effectively applied using 0000 steel wool. Apply at least two coats, buffing thoroughly between. The Cabinet Makers Wax is designed to fill any very fine grooves, cracks or imperfections in the timber to give a super-smooth finish. The number of applications will depend on the finish required.
3. Finally, apply our Cream Polish for your final finish (one soft cloth to apply sparingly and another to polish back), which will give you a high sheen. Alternatively, you may prefer to use our Carnauba Polish for a harder finish and high sheen. The Cream Polish is an ideal and easy way for you to maintain your beautiful new waxed finish.