Carnauba Polish

Surface finish for timber
Rich in carnauba wax and beeswax
Buffs to a hard, high sheen
Easy application
Suitable for chalk paint sealing
Colour
Clear
Size
$31.00 AUD
Tax included. Shipping calculated at checkout.
Shipping Info

View shipping & delivery info here >

View shipping & delivery info here >
Description

Carnauba Polish is a fast-drying surface finish, rich in carnauba wax and beeswax. Very soft and easy to apply, it hardens quickly and when buffed, imparts a beautiful hard, high sheen. It is Step 3 of our 3 Step Waxing Process.

Read more Carnauba Polish in our blog here 

Used For

A surface finish for waxed or oiled timber. Also suitable for non-porous surfaces such as metal, marble, slate and concrete. Ideal for use over chalk paint and Venetian plaster.

Surface Preparation

Ensure the surface is clean and dry before application. Timber needs to be previously waxed or oiled before application. Not suitable for raw timber.

How to Apply
  1. Dip a clean, lint-free cloth and spread sparingly over the surface, not more than one square metre at a time, in a circular motion. 
  2. Buff back vigorously with a soft, lint-free cloth or buffing pads.
  3.  Use up to three coats, buffing well between each coat. Allow 20 - 30 minutes between coats.

Dry Time

20 minutes provided excess is wiped away.

Maintenance

Depending on wear, apply if the waxed area becomes dull or faded.

Clean Up

Warm, soapy water for hands or cloth. Excess wax on timber; dampen a cloth with d-limonene or mineral turpentine.


Carnauba Polish is a fast-drying surface finish, rich in carnauba wax and beeswax. Very soft and easy to apply, it hardens quickly and when buffed, imparts a beautiful hard, high sheen. It is Step 3 of our 3 Step Waxing Process.

Read more Carnauba Polish in our blog here 

Used For

A surface finish for waxed or oiled timber. Also suitable for non-porous surfaces such as metal, marble, slate and concrete. Ideal for use over chalk paint and Venetian plaster.

Surface Preparation

Ensure the surface is clean and dry before application. Timber needs to be previously waxed or oiled before application. Not suitable for raw timber.

How to Apply
  1. Dip a clean, lint-free cloth and spread sparingly over the surface, not more than one square metre at a time, in a circular motion. 
  2. Buff back vigorously with a soft, lint-free cloth or buffing pads.
  3.  Use up to three coats, buffing well between each coat. Allow 20 - 30 minutes between coats.

Dry Time

20 minutes provided excess is wiped away.

Maintenance

Depending on wear, apply if the waxed area becomes dull or faded.

Clean Up

Warm, soapy water for hands or cloth. Excess wax on timber; dampen a cloth with d-limonene or mineral turpentine.