Linseed Oil Double Boiled 10L - SPECIAL
$350.00 AUD
Regular price $199.00 AUD$350.00 AUD
Regular price $199.00 AUDDouble Boiled Linseed Oil 10L — Limited Release
A traditional timber finishing oil, available in a one-off run for Black Friday and summer projects.
Gilly’s Double Boiled Linseed Oil penetrates bare timber to enhance its grain and bring out a richer, warmer colour. It provides a traditional oiled finish that helps resist moisture and can be refreshed with maintenance coats as needed.
The generous 10L size is a practical choice for workshops, timber restoration and larger DIY projects.
Available while stocks last. Once this batch is sold, it will not be replenished.
Key Benefits
- Enhances timber grain and brings out warm, rich tones
- Penetrates bare timber for a traditional oiled finish
- Helps improve water resistance
- Can be refreshed with maintenance coats
- Bulk 10L size for larger projects
- Limited one-off promotional release
Ideal For
- Timber trims, posts, window seals etc.
- Decks and exterior timber refresh
- Bare timber furniture and cabinetry
- Wooden tool handles
- Interior timber and joinery
- General woodworking and restoration projects
Always test on an inconspicuous area first to check colour, absorption and suitability.
How to Apply
Surface Preparation | Ensure timber is clean, dry and free from dust, grease and existing coatings that could prevent absorption. Sand as required and remove sanding dust.
Application | Apply a thin, even coat using a brush or clean, lint-free cloth. Work into the timber and wipe away all unabsorbed oil before it becomes tacky. Avoid leaving a wet film or pooling on the surface.
Allow each coat to dry before applying another. 24 hours is ideal between coats. Build the finish with thin coats rather than one heavy application.
Dry Time | Drying depends on timber porosity, coat thickness, temperature and ventilation. Allow longer in cool or humid conditions. Surface will be dry within 7 days. Allow 4 weeks for full cure. Protect from water and heavy use while the finish cures.
Coverage | Coverage varies with timber species, porosity and surface preparation. Rough or absorbent timber will require more oil.
Maintenance | Clean as needed and apply a thin maintenance coat when the timber begins to look dry or worn.
Clean Up | Clean brushes and equipment with mineral turpentine.
Important Information
This is a different product from Gilly’s Polymerised Linseed Oil. Do not assume the same drying times, finish characteristics or suitability for food-contact surfaces.
Fire risk: Oil-soaked cloths can spontaneously combust. Never leave them crumpled or piled together, or place wet oily cloths in a rubbish bin. Immediately immerse used cloths in water and follow the product’s safety directions for disposal.
Read the label before use.
Double Boiled Linseed Oil 10L — Limited Release
A traditional timber finishing oil, available in a one-off run for Black Friday and summer projects.
Gilly’s Double Boiled Linseed Oil penetrates bare timber to enhance its grain and bring out a richer, warmer colour. It provides a traditional oiled finish that helps resist moisture and can be refreshed with maintenance coats as needed.
The generous 10L size is a practical choice for workshops, timber restoration and larger DIY projects.
Available while stocks last. Once this batch is sold, it will not be replenished.
Key Benefits
- Enhances timber grain and brings out warm, rich tones
- Penetrates bare timber for a traditional oiled finish
- Helps improve water resistance
- Can be refreshed with maintenance coats
- Bulk 10L size for larger projects
- Limited one-off promotional release
Ideal For
- Timber trims, posts, window seals etc.
- Decks and exterior timber refresh
- Bare timber furniture and cabinetry
- Wooden tool handles
- Interior timber and joinery
- General woodworking and restoration projects
Always test on an inconspicuous area first to check colour, absorption and suitability.
How to Apply
Surface Preparation | Ensure timber is clean, dry and free from dust, grease and existing coatings that could prevent absorption. Sand as required and remove sanding dust.
Application | Apply a thin, even coat using a brush or clean, lint-free cloth. Work into the timber and wipe away all unabsorbed oil before it becomes tacky. Avoid leaving a wet film or pooling on the surface.
Allow each coat to dry before applying another. 24 hours is ideal between coats. Build the finish with thin coats rather than one heavy application.
Dry Time | Drying depends on timber porosity, coat thickness, temperature and ventilation. Allow longer in cool or humid conditions. Surface will be dry within 7 days. Allow 4 weeks for full cure. Protect from water and heavy use while the finish cures.
Coverage | Coverage varies with timber species, porosity and surface preparation. Rough or absorbent timber will require more oil.
Maintenance | Clean as needed and apply a thin maintenance coat when the timber begins to look dry or worn.
Clean Up | Clean brushes and equipment with mineral turpentine.
Important Information
This is a different product from Gilly’s Polymerised Linseed Oil. Do not assume the same drying times, finish characteristics or suitability for food-contact surfaces.
Fire risk: Oil-soaked cloths can spontaneously combust. Never leave them crumpled or piled together, or place wet oily cloths in a rubbish bin. Immediately immerse used cloths in water and follow the product’s safety directions for disposal.
Read the label before use.